From a dripping tap to a burst pipe, plumbing problems get worse and more expensive the longer they wait. We trace the source of leaks, clear blockages and fit kitchens and bathrooms neatly, with tidy pipework that lasts.
Water travels along pipes and joists, so a stain on the ceiling is often not directly under the leak. We check joints, fittings, waste pipes and seals methodically before opening up walls or floors.
Grease, wipes, hair and limescale are the usual culprits. We clear the blockage and tell you the likely cause so it doesn't come back.
Low pressure can come from a partly closed stopcock, an old lead or iron supply pipe, a faulty pressure reducing valve or limescale in taps and shower heads. We measure and narrow it down.
Turn off the stopcock (usually under the kitchen sink), switch off any electrics near the water, and call us straight away on the number above.
London has some of the hardest water in the UK. Limescale builds up in taps, shower heads, toilet valves, washing machines and boiler heat exchangers, reducing flow and causing drips. Descaling, replacing worn cartridges and fitting a scale reducer can help.
We match fittings to the existing pipework so joints stay watertight.
Call or send a short video
Safety advice straight away if water is leaking
Visit, trace and fix
Test for leaks and leave it tidy
If water is flowing and you can't stop it, yes. Turn off the stopcock and call us straight away.
Yes, internal sinks, toilets and many external drains.
Usually under the kitchen sink, but in London flats it can be in a hallway cupboard, under the stairs or in a communal area. It's worth finding before you need it.
Yes, plumbing for bathroom and kitchen renovations including sinks, toilets, showers and appliance connections.
Usually a worn flush valve seal or a fill valve set too high. Both are common in London because of limescale and are normally quick to fix.
Turn off the stopcock, switch off electrics near the water, open cold taps to drain the system and call us on +44 7340 848529.
A worn washer on older taps or a worn ceramic cartridge on modern lever taps. Hard water speeds up the wear.
Our jobs start from £120. The price is agreed before work starts, with no hidden extras.
Starting price
from £120
Typical job time
1 hour to 3 days
Depends on the job, confirmed with your quote
Talk to Erkan directly: +44 7340 848529
Areas covered: Central London, North London, East London, South London, West London.